Retro-Reflective Beam Sensor Trigger
This top-quality “beam sensor” creates an invisible beam that when someone walks through will instantly “trigger” your prop.
Simply mount the reflective photoelectric beam detector on wall, mount reflector on the opposite wall, then connect the included wires to a 12VDC power supply and device to be triggered.
Works with all prop controllers.
- Weatherproof (IP 66) construction for indoor/outdoor usage
- Normally Open (NO) or Normally Closed (NC) Relay
- Dark ON operation (Light ON operation also available)
- Pre-wired 6 Feet Cord
- Includes Brackets and Mounting Hardware
- Adjustable sensing distance
- Compact Size
- Easy-to-Use Instructions included
*** REQUIRES 12VDC POWER SUPPLY – NOT INCLUDED.
Retro-Reflective Beam Sensor Trigger
Click here to order our 12VDC Power Supply.
| Type | NIR Retro-Reflective | |||||||||
| Sensing Range | 0.5′ to 35′ (0.1 – 11m) | |||||||||
| Supply Voltage | 12-240VDC or 24-240VAC | |||||||||
| Current Drain |
|
|||||||||
| Response Time | 10ms (Max) | |||||||||
| Light Source | IR LED | |||||||||
| LEDs | Yellow LED (Standby) Red LED (Active) |
|||||||||
| Output | SPDT Relay Output | |||||||||
| Switching Capacity | 250VAC/1A, 30VDC/2A | |||||||||
| Enclosure | IP 66 Waterproof | |||||||||
| Ambient Temp | -4º to 131º F (-20º to 55ºC) |
Reviews
There are no reviews yet.